Product Description

The whole machine has its own booster system plug hole section, which is suitable for high viscosity ink/resin plug hole. It adopts well-known electrical hardware configuration at home and abroad, is equipped with advanced design concepts and stable mechanical structure ratio, and is supported by a number of patented technologies. Ensure stable and reliable production and operation of products.

Hardware Configuration

PLC: MITSUBISHI

Rail: THK

Cylinder: AirTAC

Communication: MITSUBISHI

Touch screen: weinview

Synchronous belt: MEGADYNE

Bearing: NSK

Ball screw: TBI

Technical Parameter

Maximum processing size: 630 mm×730mm

Squeegee pressure uniformity: ≤5kgf

Minimum processing size: 350mm×400mm

Printing pitch: 0～10 mm

Board thickness range: 0.8-4.0mm

Clearance from the board: 0～10mm

Printing speed: 30～300 mm/sec adjustable

Fine adjustment of screen frame: X, Y, θ±5mm

Maximum screen frame size: 1200×1100mm

Fixed screen frame: fixed at six points

Minimum screen frame size: 800×800mm

Covering/scraping angle: ±15°

The smallest plug hole diameter: ≤ 0.20mm

Scratch stroke: servo 0～900 mm adjustable

Table top level accuracy: ±0.1mm/m2

Equipment power: 3 KWH

Plug hole accuracy: ±0.02mm

Equipment size: 1500×1700×1900 mm

Product Performance

Supporting pressurization system to maintain pressure balance, the kilogram air pressure can reach 8-12KG

The self-locking function is set mechanically to ensure the stability and balance of the plug hole

High-viscosity ink/resin can be filled in one stroke

Four-column power lifting system, high mechanical strength, good rigidity, and strong stability